Toshiba CF1XL5D3 Printhead Ð High-Performance Inkjet Printhead for EFI UV Printers
- Write a review
$1,890.00
Enhance your EFI UV inkjet printer's performance with the Toshiba CF1XL5D3 Printhead. This genuine component ensures high-resolution printing and reliable operation, suitable for various industrial applications.
Toshiba CF1XL5D3 Printhead – High-Performance Inkjet Printhead for EFI UV Printers
The Toshiba TEC CF1XL5D3 is a high-performance industrial inkjet printhead from the CF1 recirculating family, specifically referenced for use in EFI UV printing systems. It corresponds to the extra-large drop variant of the CF1 series (aligned with the CF1BXL / CF1XL platform), designed for applications requiring high ink coverage, opacity and reliable continuous operation.
This printhead features full ink recirculation through all channels, 636 nozzles at 300 npi, and a print width of 53.7 mm. It supports multi-drop greyscale operation with an extended drop volume range (typically 36–180 pL depending on exact configuration) and a maximum firing frequency of approximately 4.8 kHz. The design provides excellent jetting reliability, automatic recovery from air bubbles and particle sedimentation, and support for higher-viscosity and high-gravity UV-curable fluids.
The CF1XL platform is used in demanding industrial UV environments, including certain EFI systems, where high drop volume and recirculation reliability are critical for coverage, opacity and production uptime.
Always verify the exact part marking on the existing printhead and the machine service documentation before ordering, as OEM-specific codes (such as CF1XL5D3) may indicate particular interface or configuration requirements.
Part Information
| Parameter | Detail |
|---|---|
| Product Name | Toshiba CF1XL5D3 Printhead – High-Performance Inkjet Printhead for EFI UV Printers |
| Manufacturer | Toshiba TEC |
| Exact Model / Code | CF1XL5D3 (OEM-specific variant of CF1XL / CF1BXL family) |
| Model Family | Toshiba TEC CF1 Series (CF1B / CF1BL / CF1BXL / CF1XL) |
| Related Standard Models | CF1BXL / CF1XL (extra-large drop) |
| Known Alias | Toshiba CF1XL for EFI, CF1XL5D3 EFI UV Printhead |
| Ink Type | UV-curable (and oil-based where specified) |
| Product Status | Available as genuine OEM / industrial supply |
| Condition | 100% Genuine OEM Factory Sealed (when supplied as new) |
| Country of Origin | Japan (Toshiba TEC) |
| Industrial Application | EFI UV printers and industrial single-pass systems requiring high drop volume and recirculation reliability |
Technical Specifications
| Parameter | Value |
|---|---|
| Technology | On-Demand Piezoelectric with full ink recirculation through all channels |
| Recirculation | Yes – through all channels |
| Active Nozzles | 636 |
| Nozzle Resolution | 300 npi |
| Print Swathe Width | 53.7 mm |
| Drop Volume (typical for CF1XL / CF1BXL) | 36 – 180 pL |
| Grayscale Levels (typical) | 7 levels (0 – 6 drops) |
| Firing Frequency (typical) | 4.8 kHz |
| Cooling Method | Air cooling |
| Ink Compatibility | UV-curable fluids (consult for specific compatibility) |
| Dimensions (typical CF1 family) | 94.1 × 26 × 79 mm |
| Weight (typical) | 161 g |
Note: Exact drop volume, greyscale levels and interface details for the CF1XL5D3 OEM code should be confirmed against the specific EFI system documentation, as minor variations can exist between standard CF1BXL/CF1XL and OEM-coded versions.
Master Comparison Matrix – Toshiba TEC CF1 Series (Extra-Large Drop Focus)
| Model | Nozzles | Drop Volume | Grayscale | Frequency |
|---|---|---|---|---|
| CF1B | 636 | 6–42 pL | 8 levels | 4.97 kHz |
| CF1BL | 636 | 57–80 pL | 4 levels | 4.8 kHz |
| CF1BXL / CF1XL / CF1XL5D3 | 636 | 36–180 pL | 7 levels | 4.8 kHz |
Technical Precision & Operational Advisory
Installation Warning
Printhead installation must be performed by a qualified technician following the official procedures of the printer manufacturer (EFI or system integrator). Incorrect handling can permanently damage the nozzle plate, electronics or ink system.
- ESD Protection: Always use a grounded wrist strap and anti-static surface when opening the packaging and handling the printhead. Piezo printheads are highly sensitive to electrostatic discharge.
- Power Isolation: Completely power down and isolate the printer before removing or installing the printhead. Do not hot-swap.
- Recirculation System: Full ink recirculation through all channels must be correctly configured. Verify flow rate, meniscus pressure and temperature control for the specific EFI system.
- OEM Code Verification: CF1XL5D3 is an OEM-specific designation. Confirm that this exact code matches the existing head or the machine documentation before ordering.
- Ink Compatibility: Use only UV-curable fluids approved for the specific EFI system and CF1XL platform. Non-approved fluids can damage the head.
- Handling Factory-Sealed Unit: Do not break the seal until ready for installation. Once the printhead has been exposed to ink or installed, it is considered used and cannot be returned.
- Drive Electronics: Confirm waveform and drive voltage compatibility with the EFI controller. Incorrect electronics will damage the head.
Compatible Models & Systems
The Toshiba CF1XL5D3 is referenced for use in EFI UV printing systems. The broader CF1XL / CF1BXL platform is also used in other industrial single-pass and high-coverage UV applications, including certain ceramic and packaging systems.
Exact printer model lists depend on the specific EFI configuration. Compatibility must be confirmed against the machine’s service documentation or the system integrator’s specifications before ordering.
Recommendation: Do not assume interchangeability with standard CF1B, CF1BL or non-recirculating heads without verification of the physical interface, electrical drive, recirculation requirements and OEM-specific coding.
Terms, Warranty & Customer Protection
Pre-Installation Guarantee: 100% brand-new, factory-original product when supplied as new. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
Toshiba CF1XL5D3 Printhead
332 Items
