- On sale!
- -42%
- New
Brady BBP11 / BBP12 300 DPI Thermal Printhead
- Write a review
$230.00
$133.40
Save 42%
Genuine OEM 4-inch 300 DPI flat-type thermal printhead engineered for Brady BBP11-34L and BBP12 (300 DPI) compact industrial desktop label printers. Designed for laboratory, wire identification, and asset tracking labels.
Product Overview
The Brady 114884 (updated catalog code 134267) is the genuine OEM 4-inch 300 DPI (12 dots/mm) flat-type thermal printhead designed for the Brady BBP11-34L and BBP12 (300 DPI) compact desktop printers. Incorporating 1,248 precision thermal heating elements across an active print width of 105.7 mm (4.16 inches), this printhead delivers high-resolution 1D and 2D barcodes, intricate logos, and small 2pt fonts required for laboratory vials, PCB component marking, and precision wire identification.
Part Information
| Product Name | Brady BBP11 / BBP12 300 DPI Thermal Printhead |
| Manufacturer / Brand | Brady |
| OEM Part Number / Reference | 114884 / 134267 |
| PrestaShop Category Hierarchy | Home, Thermal Printheads, Brady |
| Condition | 100% Genuine Original, Brand New, Factory Sealed |
| Product Status | Active OEM Production / Grade A Standard |
Technical Specifications
| Parameter | Technical Value / Specification |
|---|---|
| Technology | Flat-type desktop thin-film Thermal Transfer / Direct Thermal |
| Resolution / Channels | 300 DPI (12 dots/mm) |
| Print Width / Geometry | 105.7 mm (4.16 inches) |
| Operating Performance | Not applicable (Supports desktop line speeds up to 4 ips / 102 mm/s) |
| Technical Details & Notes | Dot pitch: 0.0847 mm (12 dots/mm); Total heating elements: 1,248 dots; Active print width: 105.7 mm; Ceramic glaze: Abrasion-resistant desktop flat glaze; Base: Clamshell-mount aluminum carrier plate with thermistor. |
Master Comparison Matrix
| Model Variant | OEM Reference | Technology | Primary Application | Status |
|---|---|---|---|---|
| Brady BBP11 / BBP12 300 DPI Thermal Printhead (CURRENT PRODUCT) | 114884 / 134267 | Flat-type desktop thin-film Thermal Transfer / Direct Thermal | Industrial Production | Active Genuine |
Technical Precision & Operational Advisory
- Electrostatic Discharge (ESD) Protection: Always wear a grounded anti-static wrist strap during handling to avoid damaging sensitive internal circuitry.
- Power Isolation Protocols: Complete electrical power-down must be verified prior to disconnecting or reconnecting ribbon cables. Never hot-plug connections.
- Operational Precision: Always disconnect external power to the Brady printer before opening the clamshell cover to service the printhead. Follow ESD precautions. Clean the ceramic glaze line and silicone platen roller with 99.9% isopropyl alcohol and cotton swabs after every ribbon or label roll change. Ensure clamshell latches engage completely on both sides to prevent uneven print darkness or ribbon wrinkling.
- Certified Technician Requirement: Physical mounting and electrical alignment must be conducted exclusively by trained industrial service personnel.
Compatible Models & Systems
| Manufacturer / Brand | Verified Compatible Models & Systems |
|---|---|
| Brady | Brady BBP11-34L, Brady BBP12 (300 DPI) |
Terms, Warranty & Customer Protection:
Pre-Installation Guarantee: 100% brand-new, factory-original product. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
