Epson SureColor MicroPiezo Printhead FA10020 FA10030 (SC-T3000 T5000 T7000 Series)

Product Overview

The Epson SureColor MicroPiezo Printhead (Part Codes: FA10030 / FA10020 / FA10010 / FA10000) is a 100% genuine original high-resolution replacement head designed for Epson's industrial SureColor T-Series wide-format printing systems. Built to deliver ultra-precise dot placement and sharp vector graphics, this printhead is essential for producing high-density CAD line drawings, geographical GIS maps, and vibrant commercial posters.

Engineered specifically for aqueous (water-based) pigment inks, this factory-sealed replacement unit serves as a direct drop-in part to restore output quality, resolving severe nozzle clogs, physical faceplate damage, electrical board short-circuits, or heavy horizontal banding across SureColor T-Series machines.

Part Information

• Brand: Epson
• Product Type: Large Format Printer (LFP) Printhead
• OEM Part Codes: FA10030, FA10020, FA10010, FA10000
• Technology: MicroPiezo Drop-On-Demand Piezoelectric
• Ink Compatibility: Aqueous Water-Based Pigment Inks (UltraChrome XD)
• Condition: 100% Genuine Original, Brand New, Factory Sealed
• Packaged Dimensions & Weight: 14 x 10 x 9 cm | 0.5 kg

Technical Precision & Operational Advisory

• Aqueous Ink Systems Only: Built strictly for water-based dye and UltraChrome XD aqueous pigment inks. Do not run eco-solvent, solvent, DTF, or UV inks through this head, as non-aqueous chemicals will dissolve internal manifold seals and cause immediate internal short-circuits.
• Flat Flexible Cable (FFC) Inspection: Carefully inspect flat ribbon head cables before installation. Any bent contact pins, physical creases, or liquid contamination on ribbon ends will short-circuit both the new printhead and the printer main board ICs upon powering on.
• Electrostatic Discharge (ESD) Safety: MicroPiezo actuators are sensitive to static electricity. Technicians must wear anti-static grounding wrist straps during installation and ensure the main power cord is completely disconnected before touching internal electronics.
• Capping Station & Wiper Maintenance: Always replace or thoroughly service the wiper blade, anti-drying cap top, and flushing pad when installing a new printhead to maintain proper vacuum seal and prevent nozzle drying.

Compatible Printers

• Epson SureColor T-Series (24"): SureColor SC-T3000, SC-T3050, SC-T3070, SC-T3200, SC-T3250, SC-T3270
• Epson SureColor T-Series (36"): SureColor SC-T5000, SC-T5050, SC-T5070, SC-T5200, SC-T5250, SC-T5270, SC-T5200D
• Epson SureColor T-Series (44"): SureColor SC-T7000, SC-T7050, SC-T7070, SC-T7200, SC-T7250, SC-T7270, SC-T7280, SC-T7200D