- On sale!
- -42%
- New
Brady IP600 / PR600 Plus 600 DPI Thermal Printhead
- Write a review
$690.00
$400.20
Save 42%
Genuine OEM 4-inch 600 DPI ultra-high resolution thermal printhead engineered for legacy Brady IP600 and PR600 Plus industrial printers. Designed for micro-polyimide PCB labels and dense electronics tracking codes.
Product Overview
The Brady 113146 (alternatively cataloged as 64457 for the IP Series) is the genuine OEM 4-inch 600 DPI (24 dots/mm) ultra-high resolution thermal printhead designed for the legacy Brady IP600, PR600 Plus, and PR600 industrial printers. Based on the proven cab A4+ engineering platform (direct cross-reference to cab 5954077.001), this advanced micro-printhead features 2,496 miniature heating elements across a 105.6 mm (4.16-inch) active print width.
Part Information
| Product Name | Brady IP600 / PR600 Plus 600 DPI Thermal Printhead |
| Manufacturer / Brand | Brady |
| OEM Part Number / Reference | 113146 / 64457 |
| PrestaShop Category Hierarchy | Home, Thermal Printheads, Brady |
| Condition | 100% Genuine Original, Brand New, Factory Sealed |
| Product Status | Active OEM Production / Grade A Standard |
Technical Specifications
| Parameter | Technical Value / Specification |
|---|---|
| Technology | Thin-film micro-heating Thermal Transfer / Direct Thermal |
| Resolution / Channels | 600 DPI (24 dots/mm) |
| Print Width / Geometry | 105.6 mm (4.16 inches) |
| Operating Performance | Not applicable (Supports precision print speeds up to 100 mm/s) |
| Technical Details & Notes | Dot pitch: 0.0423 mm (24 dots/mm); Total heating elements: 2,496 dots; Active print width: 105.6 mm; Ceramic substrate: Kyocera ultra-fine thin film; Mounting: Aluminum carrier block with integrated RFID link and thermistor. |
Master Comparison Matrix
| Model Variant | OEM Reference | Technology | Primary Application | Status |
|---|---|---|---|---|
| Brady IP600 / PR600 Plus 600 DPI Thermal Printhead (CURRENT PRODUCT) | 113146 / 64457 | Thin-film micro-heating Thermal Transfer / Direct Thermal | Industrial Production | Active Genuine |
Technical Precision & Operational Advisory
- Electrostatic Discharge (ESD) Protection: Always wear a grounded anti-static wrist strap during handling to avoid damaging sensitive internal circuitry.
- Power Isolation Protocols: Complete electrical power-down must be verified prior to disconnecting or reconnecting ribbon cables. Never hot-plug connections.
- Operational Precision: Isolate printer power before performing printhead maintenance. Due to the extreme 600 DPI dot density, adhere to strict ESD grounding protocols. Clean the ceramic glaze edge exclusively with 99.9% electronic-grade isopropyl alcohol and lint-free microfiber swabs after every ribbon change. Ensure proper head pressure to avoid damaging the delicate micro-resistor array.
- Certified Technician Requirement: Physical mounting and electrical alignment must be conducted exclusively by trained industrial service personnel.
Compatible Models & Systems
| Manufacturer / Brand | Verified Compatible Models & Systems |
|---|---|
| Brady | Brady IP600, Brady PR600 Plus, Brady PR600 |
Terms, Warranty & Customer Protection:
Pre-Installation Guarantee: 100% brand-new, factory-original product. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
