- On sale!
- -42%
- New
Honeywell Intermec PD41 PD42 300 DPI Thermal Printhead – 1-010115-900
- Write a review
$320.00
$185.60
Save 42%
Factory OEM Honeywell Intermec 300 DPI thermal replacement printhead for PD41 and PD42 printers. Delivers 11.8 dots/mm high-density imaging across a 4.09-inch print width for fine text and compliance barcodes. Pre-mounted OEM module.
Product Overview
The Honeywell Intermec 1-010115-900 is an authentic OEM 300 DPI (11.8 dots/mm) thermal printhead assembly engineered for Intermec PD41 and PD42 industrial label printers. Built for applications demanding crisp micro 2D matrix symbologies, detailed compliance tags, and small typography, it covers an active imaging width of 4.09 inches (104 mm) at speeds up to 4 inches per second (100 mm/s). The assembly mounts directly into the carriage chassis and connects via factory wiring harnesses, resolving print quality issues such as blank vertical streaks, faded barcodes, or scratched protective glazes.
Part Information
| Product Name | Honeywell Intermec PD41 PD42 300 DPI Thermal Printhead – 1-010115-900 |
| Manufacturer / Brand | Honeywell |
| OEM Part Number / Reference | OEM P/N: 1-010115-900 |
| Condition | 100% Genuine Original, Brand New, Factory Sealed |
| Product Status | Active OEM Production / Grade A Standard |
Technical Specifications
| Parameter | Technical Value / Specification |
|---|---|
| Technology | Direct Thermal / Thermal Transfer |
| Resolution / Channels | 300 DPI (11.8 dots/mm) |
| Print Width / Geometry | 4.09 inches (104 mm) |
| Operating Performance | High-Speed Jetting Standard |
| Technical Details & Notes | Resolution: 300 DPI (11.8 dots/mm); Maximum Print Width: 4.09 inches (104 mm); Printing Modes: Direct Thermal, Thermal Transfer; Element Pitch: 0.084 mm nominal; Maximum Speed: Up to 4 ips (100 mm/s) |
Master Comparison Matrix
| Model Variant | OEM Reference | Technology | Primary Application | Status |
|---|---|---|---|---|
| Honeywell Intermec PD41 PD42 300 DPI Thermal Printhead – 1-010115-900 (CURRENT PRODUCT) | OEM P/N: 1-010115-900 | Direct Thermal / Thermal Transfer | Industrial Production | Active Genuine |
Technical Precision & Operational Advisory
- Electrostatic Discharge (ESD) Protection: Always wear a grounded anti-static wrist strap during handling to avoid damaging sensitive internal circuitry.
- Power Isolation Protocols: Complete electrical power-down must be verified prior to disconnecting or reconnecting ribbon cables. Never hot-plug connections.
- Operational Precision: Always isolate printer from line power before accessing the carriage. Observe strict anti-static precautions; 300 DPI micro-resistors have high static sensitivity. Clean the printhead contact line thoroughly using 99.7% isopropyl alcohol wipes. When performing a resolution upgrade from 203 DPI, ensure printer settings and print driver configurations are adjusted to 300 DPI. Check ribbon tension to avoid diagonal wrinkling over the printline.
- Certified Technician Requirement: Physical mounting and electrical alignment must be conducted exclusively by trained industrial service personnel.
Compatible Models & Systems
| Manufacturer / Brand | Verified Compatible Models & Systems |
|---|---|
| Honeywell | Intermec: |
Terms, Warranty & Customer Protection:
Pre-Installation Guarantee: 100% brand-new, factory-original product. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
OEM P/N: 1-010115-900
308 Items
