- On sale!
- -42%
- New
Zebra 105SL Thermal Printhead 203 DPI – G32432-1M
- Write a review
$320.00
$185.60
Save 42%
Authentic OEM 203 DPI replacement thermal printhead for Zebra 105SL legacy industrial printers. Delivers dependable 4.09-inch active print coverage for warehouse, logistics, and bulk packaging operations. Direct factory spare part restoring continuous dot line output.
Product Overview
The Zebra G32432-1M is a genuine OEM 203 DPI (8 dots/mm) replacement thermal printhead designed for the legacy Zebra 105SL industrial printer series. Mounted on a heavy-gauge aluminum heatsink frame, it delivers consistent thermal transfer and direct thermal printing up to 8 inches per second across a 4.09-inch (104 mm) active print width. This unit directly addresses failed heating elements, resistor burnout, and abrasive wear lines on legacy 105SL units. Note: This part is specific to the classic 105SL model and is not interchangeable with the later 105SLPlus carriage assembly.
Part Information
| Product Name | Zebra 105SL Thermal Printhead 203 DPI – G32432-1M |
| Manufacturer / Brand | Zebra |
| OEM Part Number / Reference | OEM P/N: G32432-1M |
| Condition | 100% Genuine Original, Brand New, Factory Sealed |
| Product Status | Active OEM Production / Grade A Standard |
Technical Specifications
| Parameter | Technical Value / Specification |
|---|---|
| Technology | Direct Thermal / Thermal Transfer |
| Resolution / Channels | 203 DPI |
| Print Width / Geometry | 4.09 in (104 mm) |
| Operating Performance | High-Speed Jetting Standard |
| Technical Details & Notes | Printing Technology: Direct Thermal / Thermal Transfer; Native Resolution: 203 DPI (8 dots/mm); Maximum Print Width: 4.09 inches (104 mm); Element Density: 8 dots/mm; Assembly Format: Heavy-duty aluminum heatsink bracket assembly; Electrical Interface: Factory multi-pin header terminals |
Master Comparison Matrix
| Model Variant | OEM Reference | Technology | Primary Application | Status |
|---|---|---|---|---|
| Zebra 105SL Thermal Printhead 203 DPI – G32432-1M (CURRENT PRODUCT) | OEM P/N: G32432-1M | Direct Thermal / Thermal Transfer | Industrial Production | Active Genuine |
Technical Precision & Operational Advisory
- Electrostatic Discharge (ESD) Protection: Always wear a grounded anti-static wrist strap during handling to avoid damaging sensitive internal circuitry.
- Power Isolation Protocols: Complete electrical power-down must be verified prior to disconnecting or reconnecting ribbon cables. Never hot-plug connections.
- Operational Precision: Disconnect printer AC power before opening the print carriage. Use an anti-static wrist strap to avoid electrostatic damage to internal drive circuits. Never touch or scrape the glazed ceramic thermal array. Check the platen roller for flat spots or adhesive accumulation, and clean thoroughly. Wipe the thermal heating line using 99.7% electronic-grade isopropyl alcohol and lint-free technical wipes prior to initial calibration.
- Certified Technician Requirement: Physical mounting and electrical alignment must be conducted exclusively by trained industrial service personnel.
Compatible Models & Systems
| Manufacturer / Brand | Verified Compatible Models & Systems |
|---|---|
| Zebra | Zebra: |
Terms, Warranty & Customer Protection:
Pre-Installation Guarantee: 100% brand-new, factory-original product. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
OEM P/N: G32432-1M
440 Items
