Xaar 64 Original OEM Printhead
- Write a review
$130.00
Genuine Xaar factory-original 64 piezo printhead. Compact binary head designed for coding, marking and early industrial inkjet applications.
Xaar 64 Original OEM Printhead
The Xaar 64 is an original OEM industrial piezoelectric inkjet printhead from Xaar’s product range. It is designed for specialised industrial printing applications requiring reliable drop-on-demand performance in a compact form factor.
As with other Xaar printheads, the Xaar 64 utilises piezoelectric actuation technology for precise fluid deposition. Publicly available detailed technical specifications for this specific model are limited, and performance characteristics (nozzle count, drop volume, resolution and fluid compatibility) may vary depending on the exact variant and intended application.
This genuine OEM factory-sealed unit is supplied for integration into compatible industrial systems. Users are advised to verify full technical compatibility with their specific machine, firmware and fluid system before installation.
Part Information
| Product Name | Xaar 64 Original OEM Printhead |
| Brand | Xaar plc (United Kingdom) |
| Category | Industrial Piezoelectric Inkjet Printhead |
| Condition | 100% Genuine Original OEM – Factory Sealed, Brand New, Never Used or Refurbished |
| Country of Origin | United Kingdom |
| Ink / Fluid Type | Dependent on specific variant – confirm with technical documentation |
| Technology | Piezoelectric drop-on-demand |
| Note | Limited public datasheet available – verify exact specifications with Xaar or authorised distributor documentation |
Technical Specifications
| Parameter | Specification |
|---|---|
| Active Nozzles | Refer to specific variant documentation |
| Print Swathe Width | Refer to specific variant documentation |
| Nozzle Density / Resolution | Refer to specific variant documentation |
| Drop Volume | Refer to specific variant documentation |
| Firing Mode | Piezoelectric drop-on-demand |
| Fluid Compatibility | Dependent on variant – confirm approved fluids |
| Key Characteristics | Compact industrial design, OEM-focused integration |
* Detailed public technical specifications for the Xaar 64 are limited. Always refer to the official Xaar datasheet or authorised technical documentation for the exact variant before system design or installation.
Xaar 64 Series Overview
| Model | Type | Notes | Primary Application Focus |
|---|---|---|---|
| Xaar 64 ★ | OEM Industrial Printhead | Limited public datasheet | Specialised industrial / OEM systems |
★ Highlighted row indicates the current product. Due to limited publicly available technical data, always confirm exact specifications with official Xaar documentation or your system supplier.
Technical Precision & Operational Advisory
CRITICAL SAFETY & HANDLING WARNINGS
- ESD Protection: The printhead is sensitive to electrostatic discharge. Always use a properly grounded wrist strap, anti-static work mat, and maintain relative humidity between 40–60% RH. Never touch the electrical connectors or nozzle plate without ESD protection.
- Power Isolation & Sequencing: Ensure correct power sequencing is followed according to Xaar or system manufacturer guidelines. Use only approved driver electronics and power supplies. Incorrect voltage application or hot-plugging can permanently damage the actuator.
- Meniscus Pressure / Sub-Atmospheric Control: Maintain stable negative (sub-atmospheric) meniscus pressure at all times. Incorrect pressure settings can cause nozzle flooding, air ingestion or deprime. Always follow the pressure parameters recommended for the specific fluid in use.
- Fluid & System Compatibility: Confirm approved fluids and system requirements before installation. Ensure the ink system is clean, properly filtered and free of contamination.
Failure to observe these operational guidelines may result in irreversible damage that is not covered under warranty. Installation and commissioning should only be performed by trained technicians experienced with the specific system using this printhead.
Compatible Models & Systems
Compatibility depends on the exact variant of the Xaar 64 and the target system. Typical use cases include:
- Specialised industrial printing systems designed for this OEM printhead
- Legacy or niche platforms that originally specified the Xaar 64
- Custom OEM integrations – full verification required
Full electrical and mechanical compatibility must be verified against the specific machine model, firmware and waveform set before installation. Contact technical support with your machine make and model for confirmation.
Terms, Warranty & Customer Protection
| Pre-Installation Guarantee | Every unit is guaranteed 100% genuine, brand-new, and factory-sealed. The product is warranted free from manufacturing defects when received with the original factory seal intact and prior to any installation or fluid introduction. |
| Video Unboxing Requirement | Any claim for damage, shortage, or non-conformity must be supported by a continuous, unedited video recording of the unboxing process, starting from the outer packaging and clearly showing the serial number / barcode. Claims submitted without a complete unboxing video will not be processed. |
| Non-Returnable Policy | Once the factory seal is broken, the printhead is installed, or any fluid is introduced into the device, the product becomes strictly non-returnable and non-refundable. This policy applies to all industrial piezoelectric printheads due to their extreme sensitivity to contamination and operational history. |
| Storage & Handling | Store in the original sealed packaging at 10–30 °C and 40–60% relative humidity. Protect from strong magnetic fields, direct sunlight, and electrostatic sources. Do not open the seal until the printhead is ready for immediate installation. |
100% Genuine Xaar OEM Product – Factory Sealed – Authenticity Guaranteed
Xaar 64
122 Items
