- On sale!
- -42%
- New
TSC PEX-2000 Series Thermal Printhead 300 DPI 98-0850004-10LF
- Write a review
$560.00
$324.80
Save 42%
Authentic 300 DPI high-resolution thermal printhead for TSC PEX-2000 Series print engines, including PEX-2340L and PEX-2340R. Produces sharp 2D DataMatrix codes, regulatory logos, and small text at speeds up to 14 ips. Factory OEM replacement.
Product Overview
The TSC 98-0850004-10LF is an authentic 300 DPI (11.8 dots/mm) thermal printhead assembly engineered for the PEX-2000 Series automated print engines (specifically 4-inch models PEX-2340L and PEX-2340R). Delivering an active print path of 4.09 inches (104 mm) at print speeds up to 14 inches per second (356 mm/s), this printhead delivers razor-sharp resolution for automated packaging compliance, pharmaceutical serialization, and electronics asset labeling. Constructed with precision thin-film resistors, it provides uniform dot geometry across extensive print cycles. Symmetrical carriage pressure calibration is essential upon replacement to avoid edge voiding and ribbon drift.
Part Information
| Product Name | TSC PEX-2000 Series Thermal Printhead 300 DPI 98-0850004-10LF |
| Manufacturer / Brand | TSC |
| OEM Part Number / Reference | 98-0850004-10LF |
| Condition | 100% Genuine Original, Brand New, Factory Sealed |
| Product Status | Active OEM Production / Grade A Standard |
Technical Specifications
| Parameter | Technical Value / Specification |
|---|---|
| Technology | Direct Thermal / Thermal Transfer |
| Resolution / Channels | 300 DPI |
| Print Width / Geometry | 4.09 in (104 mm) |
| Operating Performance | High-Speed Jetting Standard |
| Technical Details & Notes | Technology: Direct Thermal / Thermal Transfer; Resolution: 300 DPI (11.8 dots/mm); Maximum Print Width: 4.09 in (104 mm); Operating Mode: Thermal transfer and direct thermal; Component Type: High-density print engine thermal printhead module |
Master Comparison Matrix
| Model Variant | OEM Reference | Technology | Primary Application | Status |
|---|---|---|---|---|
| TSC PEX-2000 Series Thermal Printhead 300 DPI 98-0850004-10LF (CURRENT PRODUCT) | 98-0850004-10LF | Direct Thermal / Thermal Transfer | Industrial Production | Active Genuine |
Technical Precision & Operational Advisory
- Electrostatic Discharge (ESD) Protection: Always wear a grounded anti-static wrist strap during handling to avoid damaging sensitive internal circuitry.
- Power Isolation Protocols: Complete electrical power-down must be verified prior to disconnecting or reconnecting ribbon cables. Never hot-plug connections.
- Operational Precision: Disconnect power before beginning replacement. Take full ESD grounding precautions when handling 300 DPI thermal arrays. Avoid using abrasive tools or excessive pressure that could scratch the protective glazing. Clean the printhead with 99% pure isopropyl alcohol before powering on.
- Certified Technician Requirement: Physical mounting and electrical alignment must be conducted exclusively by trained industrial service personnel.
Compatible Models & Systems
| Manufacturer / Brand | Verified Compatible Models & Systems |
|---|---|
| TSC | TSC: |
Terms, Warranty & Customer Protection:
Pre-Installation Guarantee: 100% brand-new, factory-original product. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
98-0850004-10LF
399 Items
