- On sale!
- -42%
- New
Avery / Novexx AP 5.4 / AP 4.4 300 DPI Thermal Printhead
- Write a review
$420.00
$243.60
Save 42%
Genuine OEM 105.7mm 300 DPI flat-head thermal printhead engineered for Novexx AP 5.4, Avery AP 5.4, and AP 4.4 high-resolution industrial tabletop barcode printers. Designed for crisp 2D Data Matrix codes, small fonts, and detailed product tags.
Product Overview
The Novexx Solutions N102047 (legacy part numbers A0400 and 102047) is the genuine OEM 300 DPI (12 dots/mm) flat-head thermal printhead designed for high-resolution labeling on Novexx AP 5.4, Avery AP 5.4, and AP 4.4 industrial tabletop printers. Featuring 1,248 precision thermal heating elements across an active print width of 105.7 mm (4.16 inches), this printhead delivers razor-sharp text, fine graphics, and verified high-density 1D and 2D GS1 compliance barcodes at speeds up to 150 mm/s.
Part Information
| Product Name | Avery / Novexx AP 5.4 / AP 4.4 300 DPI Thermal Printhead |
| Manufacturer / Brand | Novexx Solutions |
| OEM Part Number / Reference | N102047 |
| PrestaShop Category Hierarchy | Home |
| Condition | 100% Genuine Original, Brand New, Factory Sealed |
| Product Status | Active OEM Production / Grade A Standard |
Technical Specifications
| Parameter | Technical Value / Specification |
|---|---|
| Technology | Flat-type industrial thin-film Thermal Transfer / Direct Thermal |
| Resolution / Channels | 300 DPI (12 dots/mm) |
| Print Width / Geometry | 105.7 mm (4.16 inches) |
| Operating Performance | Not applicable (Supports print speeds up to 150 mm/s) |
| Technical Details & Notes | Dot pitch: 0.0847 mm (12 dots/mm); Total heating elements: 1,248 dots; Active print width: 105.7 mm; Ceramic construction: High-wear industrial flat glaze; Factory resistance calibration: Built-in thermistor circuit. |
Master Comparison Matrix
| Model Variant | OEM Reference | Technology | Primary Application | Status |
|---|---|---|---|---|
| Avery / Novexx AP 5.4 / AP 4.4 300 DPI Thermal Printhead (CURRENT PRODUCT) | N102047 | Flat-type industrial thin-film Thermal Transfer / Direct Thermal | Industrial Production | Active Genuine |
Technical Precision & Operational Advisory
- Electrostatic Discharge (ESD) Protection: Always wear a grounded anti-static wrist strap during handling to avoid damaging sensitive internal circuitry.
- Power Isolation Protocols: Complete electrical power-down must be verified prior to disconnecting or reconnecting ribbon cables. Never hot-plug connections.
- Operational Precision: Ensure printer power is switched off before replacing the printhead to protect internal driver ICs from voltage transients. Wear an ESD grounding strap during installation. Regularly clean the printhead element row and drive platen using 99.9% isopropyl alcohol and lint-free cotton swabs. Verify printer configuration matches 300 DPI strobing settings, as converting a 203 DPI machine to 300 DPI requires matching sensor and firmware parameters.
- Certified Technician Requirement: Physical mounting and electrical alignment must be conducted exclusively by trained industrial service personnel.
Compatible Models & Systems
| Manufacturer / Brand | Verified Compatible Models & Systems |
|---|---|
| Novexx Solutions | Avery AP 5.4 (300 DPI), Novexx AP 5.4 (300 DPI), Avery AP 4.4 (300 DPI) |
Terms, Warranty & Customer Protection:
Pre-Installation Guarantee: 100% brand-new, factory-original product. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
