- On sale!
- -42%
- New
Markem-Imaje SmartDate 32mm 300 DPI Thermal Printhead
- Write a review
$310.00
$179.80
Save 42%
Genuine OEM 32mm 300 DPI corner-edge thermal printhead engineered for Markem-Imaje SmartDate X30, X40 (32mm), X45 (32mm), and SmartDate 5 compact packaging overprinters. Built for narrow-web intermittent date coding, lot numbering, and barcode printing on flexible film packaging.
Product Overview
The Markem-Imaje 10014023 (legacy reference 34103) is the original OEM 32mm 300 DPI corner-edge thermal printhead manufactured for compact flexible packaging applications. Fabricated with a Kyocera KST-32-8MPF1-MKM thin-film ceramic substrate, this assembly features 384 heating elements spanning a 32.0 mm print width at a native resolution of 12 dots/mm.
Part Information
| Product Name | Markem-Imaje SmartDate 32mm 300 DPI Thermal Printhead |
| Manufacturer / Brand | Markem-Imaje |
| OEM Part Number / Reference | 10014023 |
| PrestaShop Category Hierarchy | Home, Thermal Printheads, Markem-Imaje |
| Condition | 100% Genuine Original, Brand New, Factory Sealed |
| Product Status | Active OEM Production / Grade A Standard |
Technical Specifications
| Parameter | Technical Value / Specification |
|---|---|
| Technology | Corner-edge (near-edge) thin-film thermal transfer |
| Resolution / Channels | 300 DPI (12 dots/mm) |
| Print Width / Geometry | 32.0 mm (1.26 inches) |
| Operating Performance | Not applicable (Optimized for intermittent packaging speeds up to 600 mm/s and continuous speeds up to 1,200 mm/s) |
| Technical Details & Notes | Dot pitch: 0.0847 mm; Total heating elements: 384 dots; Active print width: 32.0 mm; Ceramic substrate: Kyocera thin-film corner-edge glaze; Integrated calibration thermistor and ground wiring harness. |
Master Comparison Matrix
| Model Variant | OEM Reference | Technology | Primary Application | Status |
|---|---|---|---|---|
| Markem-Imaje SmartDate 32mm 300 DPI Thermal Printhead (CURRENT PRODUCT) | 10014023 | Corner-edge (near-edge) thin-film thermal transfer | Industrial Production | Active Genuine |
Technical Precision & Operational Advisory
- Electrostatic Discharge (ESD) Protection: Always wear a grounded anti-static wrist strap during handling to avoid damaging sensitive internal circuitry.
- Power Isolation Protocols: Complete electrical power-down must be verified prior to disconnecting or reconnecting ribbon cables. Never hot-plug connections.
- Operational Precision: Disconnect main power to the coder prior to unplugging the flexible printed circuit (FPC) interface cable to prevent electrical voltage transients. Maintain strict ESD grounding procedures during installation. Inspect the silicone platen roller or rubber print pad for grooves or ink build-up before mounting the new printhead. Clean the ceramic glaze edge using 99.9% IPA with a clean microfiber swab; avoid abrasive materials or metal blades.
- Certified Technician Requirement: Physical mounting and electrical alignment must be conducted exclusively by trained industrial service personnel.
Compatible Models & Systems
| Manufacturer / Brand | Verified Compatible Models & Systems |
|---|---|
| Markem-Imaje | Markem-Imaje SmartDate X30, SmartDate X40 (32mm version), SmartDate X45 (32mm version), SmartDate 5 (32mm version), SmartDate 2 (32mm version), SmartDate 3 (32mm version) |
Terms, Warranty & Customer Protection:
Pre-Installation Guarantee: 100% brand-new, factory-original product. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
10014023
194 Items
