- On sale!
- -42%
- New
Honeywell Intermec PD41 PD42 203 DPI Thermal Printhead – 1-010114-900
- Write a review
$240.00
$139.20
Save 42%
Genuine Honeywell Intermec 203 DPI replacement thermal printhead kit for PD41 and PD42 light-industrial printers. Supports reliable 4.09-inch active print width for logistics, ticketing, and inventory labeling. Factory-certified OEM part.
Product Overview
The Honeywell Intermec 1-010114-900 is an authentic factory OEM 203 DPI (8 dots/mm) thermal printhead replacement kit designed for the Intermec PD41 and PD42 commercial industrial label printer series. Built on an integrated aluminum heatsink frame with a thick-film ceramic resistor substrate, it provides an active print swath of 4.09 inches (104 mm) at print speeds up to 6 inches per second (150 mm/s). It serves as a direct drop-in replacement to eliminate vertical non-printing streaks, poor barcode read rates, and mechanical wear on the resistor glaze, restoring factory print contrast across direct thermal and thermal transfer media.
Part Information
| Product Name | Honeywell Intermec PD41 PD42 203 DPI Thermal Printhead – 1-010114-900 |
| Manufacturer / Brand | Honeywell |
| OEM Part Number / Reference | OEM P/N: 1-010114-900 |
| Condition | 100% Genuine Original, Brand New, Factory Sealed |
| Product Status | Active OEM Production / Grade A Standard |
Technical Specifications
| Parameter | Technical Value / Specification |
|---|---|
| Technology | Direct Thermal / Thermal Transfer |
| Resolution / Channels | 203 DPI (8 dots/mm) |
| Print Width / Geometry | 4.09 inches (104 mm) |
| Operating Performance | High-Speed Jetting Standard |
| Technical Details & Notes | Resolution: 203 DPI (8 dots/mm); Maximum Print Width: 4.09 inches (104 mm); Printing Modes: Direct Thermal, Thermal Transfer; Construction: Thick-film ceramic array on aluminum chassis; Maximum Speed: Up to 6 ips (150 mm/s) |
Master Comparison Matrix
| Model Variant | OEM Reference | Technology | Primary Application | Status |
|---|---|---|---|---|
| Honeywell Intermec PD41 PD42 203 DPI Thermal Printhead – 1-010114-900 (CURRENT PRODUCT) | OEM P/N: 1-010114-900 | Direct Thermal / Thermal Transfer | Industrial Production | Active Genuine |
Technical Precision & Operational Advisory
- Electrostatic Discharge (ESD) Protection: Always wear a grounded anti-static wrist strap during handling to avoid damaging sensitive internal circuitry.
- Power Isolation Protocols: Complete electrical power-down must be verified prior to disconnecting or reconnecting ribbon cables. Never hot-plug connections.
- Operational Precision: Disconnect power cord before releasing carriage latches. Use ESD grounding precautions during replacement to protect sensitive driver ICs. Clean the heating element line with 99.7% isopropyl alcohol wipes prior to running media. Ensure the flexible flat cable connector is fully inserted square into the printhead socket without pinched leads. Confirm platen roller is free of debris or label adhesive to prevent substrate cracking.
- Certified Technician Requirement: Physical mounting and electrical alignment must be conducted exclusively by trained industrial service personnel.
Compatible Models & Systems
| Manufacturer / Brand | Verified Compatible Models & Systems |
|---|---|
| Honeywell | Intermec: |
Terms, Warranty & Customer Protection:
Pre-Installation Guarantee: 100% brand-new, factory-original product. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
OEM P/N: 1-010114-900
280 Items
