- On sale!
- -42%
- New
Brady i7100 4-inch 600 DPI Thermal Printhead
- Write a review
$725.00
$420.50
Save 42%
Genuine OEM 4-inch 600 DPI ultra-high resolution thermal printhead engineered for Brady i7100 industrial printers. Designed for micro-polyimide PCB labels, dense 2D Data Matrix codes, and electronics marking.
Product Overview
The Brady 149066 is the genuine OEM 4-inch 600 DPI (24 dots/mm) ultra-high resolution corner-edge thermal printhead engineered for the Brady i7100 industrial tabletop printer. Built upon a precision Kyocera thin-film ceramic substrate, this advanced micro-printhead incorporates 2,496 miniature heating elements across an active print width of 105.7 mm (4.16 inches). Co-developed on the cab SQUIX 4 engineering platform (matching cab part number 5987070.001 / 5977380.001), it delivers unparalleled dot precision for the most demanding miniaturization requirements.
Part Information
| Product Name | Brady i7100 4-inch 600 DPI Thermal Printhead |
| Manufacturer / Brand | Brady |
| OEM Part Number / Reference | 149066 |
| PrestaShop Category Hierarchy | Home, Thermal Printheads, Brady |
| Condition | 100% Genuine Original, Brand New, Factory Sealed |
| Product Status | Active OEM Production / Grade A Standard |
Technical Specifications
| Parameter | Technical Value / Specification |
|---|---|
| Technology | Corner-edge (near-edge) thin-film micro-heating Thermal Transfer / Direct Thermal |
| Resolution / Channels | 600 DPI (24 dots/mm) |
| Print Width / Geometry | 105.7 mm (4.16 inches) |
| Operating Performance | Not applicable (Supports precision print speeds up to 150 mm/s) |
| Technical Details & Notes | Dot pitch: 0.0423 mm (24 dots/mm); Total heating elements: 2,496 dots; Active print width: 105.7 mm; Ceramic substrate: Kyocera ultra-fine corner-edge thin film; Mounting: Precision aluminum carrier block with calibration thermistor. |
Master Comparison Matrix
| Model Variant | OEM Reference | Technology | Primary Application | Status |
|---|---|---|---|---|
| Brady i7100 4-inch 600 DPI Thermal Printhead (CURRENT PRODUCT) | 149066 | Corner-edge (near-edge) thin-film micro-heating Thermal Transfer / Direct Thermal | Industrial Production | Active Genuine |
Technical Precision & Operational Advisory
- Electrostatic Discharge (ESD) Protection: Always wear a grounded anti-static wrist strap during handling to avoid damaging sensitive internal circuitry.
- Power Isolation Protocols: Complete electrical power-down must be verified prior to disconnecting or reconnecting ribbon cables. Never hot-plug connections.
- Operational Precision: Always isolate printer power before performing printhead maintenance. Due to the extreme 600 DPI dot density, the heating elements are highly sensitive to microscopic debris and static discharge. Adhere to strict ESD grounding protocols. Clean the ceramic glaze edge exclusively with 99.9% electronic-grade isopropyl alcohol and lint-free microfiber swabs after every ribbon roll change. Ensure proper tension and head pressure to avoid damaging the delicate micro-resistor array.
- Certified Technician Requirement: Physical mounting and electrical alignment must be conducted exclusively by trained industrial service personnel.
Compatible Models & Systems
| Manufacturer / Brand | Verified Compatible Models & Systems |
|---|---|
| Brady | Brady i7100 (600 DPI Standard), Brady i7100 (600 DPI Peel version) |
Terms, Warranty & Customer Protection:
Pre-Installation Guarantee: 100% brand-new, factory-original product. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
