- On sale!
- -42%
- New
Videojet DataFlex 6530 / 6330 53mm Printhead Assembly
- Write a review
$495.00
$287.10
Save 42%
Genuine OEM 53mm 300 DPI all-electric corner-edge thermal printhead assembly engineered for Videojet DataFlex 6530 and 6330 (53mm) Intelligent Motion overprinters. Features quick-disconnect docking and integrated electronic wear-detection indexing.
Product Overview
The Videojet 408657 (secondary sub-assembly reference 408534) is the genuine OEM 53mm 300 DPI (12 dots/mm) corner-edge thermal printhead assembly engineered for the next-generation Videojet DataFlex 6530 and DataFlex 6330 (53mm) Intelligent Motion overprinters. Built with an advanced near-edge ceramic substrate, this assembly features 640 micro-machined thermal heating elements across a 53.3 mm (2.1-inch) print width.
Part Information
| Product Name | Videojet DataFlex 6530 / 6330 53mm Printhead Assembly |
| Manufacturer / Brand | Videojet |
| OEM Part Number / Reference | 408657 |
| PrestaShop Category Hierarchy | Home, Thermal Printheads, Videojet |
| Condition | 100% Genuine Original, Brand New, Factory Sealed |
| Product Status | Active OEM Production / Grade A Standard |
Technical Specifications
| Parameter | Technical Value / Specification |
|---|---|
| Technology | Corner-edge (near-edge) thin-film thermal transfer (All-electric Intelligent Motion) |
| Resolution / Channels | 300 DPI (12 dots/mm) |
| Print Width / Geometry | 53.3 mm (2.1 inches) |
| Operating Performance | Not applicable (Supports operational line speeds up to 1,200 mm/s continuous and 1,000 mm/s intermittent) |
| Technical Details & Notes | Dot pitch: 0.0847 mm (12 dots/mm); Total heating elements: 640 dots; Active print width: 53.3 mm; Actuation: Airless electromagnetic actuator interface; Features: Quick-disconnect tool-less locking latch, electronic wear-indexing chip, factory thermal calibration. |
Master Comparison Matrix
| Model Variant | OEM Reference | Technology | Primary Application | Status |
|---|---|---|---|---|
| Videojet DataFlex 6530 / 6330 53mm Printhead Assembly (CURRENT PRODUCT) | 408657 | Corner-edge (near-edge) thin-film thermal transfer (All-electric Intelligent Motion) | Industrial Production | Active Genuine |
Technical Precision & Operational Advisory
- Electrostatic Discharge (ESD) Protection: Always wear a grounded anti-static wrist strap during handling to avoid damaging sensitive internal circuitry.
- Power Isolation Protocols: Complete electrical power-down must be verified prior to disconnecting or reconnecting ribbon cables. Never hot-plug connections.
- Operational Precision: Ensure coder power is switched off before docking or releasing the printhead latch. Do not force the quick-disconnect locking mechanism; verify alignment tabs seat smoothly. Follow ESD precautions during handling. Clean the ceramic edge and the magnetic docking surfaces using 99.9% isopropyl alcohol and lint-free wipes. Recalibrate head indexing in the printer UI if prompted by the iAssure diagnostic system.
- Certified Technician Requirement: Physical mounting and electrical alignment must be conducted exclusively by trained industrial service personnel.
Compatible Models & Systems
| Manufacturer / Brand | Verified Compatible Models & Systems |
|---|---|
| Videojet | Videojet DataFlex 6530 (53mm version), Videojet DataFlex 6330 (53mm version) |
Terms, Warranty & Customer Protection:
Pre-Installation Guarantee: 100% brand-new, factory-original product. Each unit is inspected and sealed before shipment. We guarantee authenticity and factory condition upon arrival.
Store Warranty Policy: 30 working days warranty covering manufacturing defects. Warranty claims require complete unboxing video and professional installation video performed by an experienced technician following standard recommended procedures.
Final Sale Conditions: Once the printhead has been exposed to ink or installed into a printer, it is considered used and cannot be returned or exchanged. Please verify compatibility and installation readiness before opening the sealed packaging.
408657
145 Items
