- On sale!
- -42%
- New
Original Mutoh MY-80037 8-Head Carriage Assembly Base (Spitfire 100 / Blizzard Series)
- Write a review
$850.00
$493.00
Save 42%
Factory-original Mutoh MY-80037 8-head mounting base and carriage bracket assembly engineered for Mutoh Spitfire 100 industrial mild-solvent printers.
OEM Grand-Format Solvent Carriage & Gantry Component
Original Mutoh MY-80037 8-Head Carriage Assembly Base (Spitfire 100 / Blizzard Series)
OEM Part Number: MY-80037 | Heavy-Duty Precision-Machined Aluminum Carriage Chassis & 8-Station DX4 Head Mounting Block for Grand-Format Solvent Presses
Spitfire 100 Grand-Format 8-Head Gantry Architecture Notice
The Mutoh MY-80037 Carriage Assembly Base is an authentic factory-original OEM structural gantry component engineered exclusively for Mutoh’s grand-format high-speed solvent production presses: the Spitfire 100, Spitfire 90, and Blizzard 90 series equipped with full 8-head staggered DX4 carriage arrays. Precision-machined from high-strength aerospace-grade aluminum with solvent-resistant protective anodization, this chassis serves as the mechanical foundation holding up to 8 individual MY-44743 DX4 solvent printheads, carriage distribution boards (FCP boards), ribbon cable looms, and damper fluid blocks under high-speed reciprocating gantry loads.
Product Overview
The Original Mutoh MY-80037 Spitfire 100 Carriage Assembly Base provides rigid mechanical registration and thermal stability for grand-format printing systems operating at high scanning speeds over 100-inch wide media paths. Over years of continuous operation, thermal cycling, and high-frequency carriage reversals, raw gantry chassis blocks can suffer from micro-warping or mechanical fatigue at printhead mounting datums. Replacing the core carriage base restores strict perpendicularity, printhead leveling tolerances, and accurate inter-head dot alignment.
Designed with precision-bored alignment pin datums, integrated cable routing channels, and vibration-dampened linear bearing mounting blocks, the MY-80037 integrates seamlessly with the Spitfire gantry drive belt, encoder strip assembly, and trailing cable chains. Its robust construction eliminates gantry twisting during high-acceleration passes, guaranteeing sharp drop landing precision across multi-pass production printing with aggressive eco-solvent and mild-solvent ink sets.
Part Information
| Product Name | Original Mutoh Spitfire 100 8-Head Carriage Assembly Base |
| OEM Manufacturer | Mutoh Industries Ltd. (Japan) |
| Primary OEM Part Number | MY-80037 |
| Chassis Material & Treatment | Precision-Machined Structural Aluminum Alloy with Anti-Corrosion Solvent Anodization |
| Component Classification | Grand-Format Structural Gantry Chassis & 8-Station Printhead Mounting Block |
| Compatible Printhead Capacity | Supports up to 8 Staggered DX4 Solvent Printheads (MY-44743 / DF-49059) |
| Supported Printer Series | Mutoh Spitfire 65 / 90 / 100 & Blizzard 65 / 90 Grand-Format Presses |
| Country of Origin | Japan (100% Genuine Original Factory Part) |
Technical Specifications
| Mechanical Construction | Milled billet aluminum chassis with integrated linear rail bearing blocks and belt tensioners |
| Printhead Stagger Stations | 8 precision-dowel alignment slots for DX4 solvent printhead blocks |
| Electronic Mounting Provisions | Standoff mounts for carriage connection boards (FCP boards) and ground harnesses |
| Fluid Management Routing | Integrated damper bracket mounting shelves for 8x dual solvent ink dampers |
| Gantry Interface | Direct attachment interface to Spitfire grand-format linear guide rails and timing belt drive |
| Operating Environment | 18°C to 30°C (64°F to 86°F); 35% to 75% RH non-condensing |
| Gross Shipping Weight | Approx. 2.50 kg (packaged with protective foam padding and structural bracing) |
Key Features & Operational Advantages
- Rigid Grand-Format Gantry Chassis: Prevents structural flex and gantry twisting during high-speed reciprocating scans across 100-inch wide media widths.
- 8-Station Precision Alignment: Factory-machined dowel datums position all 8 DX4 solvent printheads with sub-micron angular and linear accuracy.
- Solvent-Resistant Anodized Armor: Surface passivation withstands accidental eco-solvent spills, cleaning fluid contact, and aggressive ambient shop vapors.
- Direct OEM Structural Fitment: Engineered to bolt directly onto Spitfire and Blizzard linear rail blocks, eliminating custom shimming or gantry modification.
CRITICAL TECHNICAL & SERVICE ADVISORY
1. Platform Specificity (MY-80037 Spitfire 100 vs. Rockhopper II Bases): The MY-80037 is engineered specifically for the 8-head grand-format Spitfire 100 / Blizzard 90 series. It is not interchangeable with standard 4-head Rockhopper II carriage bases or smaller table-width chassis. Verify machine model width and head count prior to teardown.
2. Precision Gantry Leveling & Alignment: Replacing a grand-format carriage base is a major overhaul. Technicians must use dial indicators to level the gantry relative to the print platen, adjust linear rail preload, and execute rigorous physical slant and inter-head electronic alignments (`HEAD SLANT` / bi-directional calibration) across all 8 printheads.
3. FFC Ribbon Cable & Grounding Harness Inspection: When transferring electronics to the new carriage base, inspect all flat flexible cables (FFC) and ensure the metal carriage grounding braid is securely bolted to the chassis datum. Poor grounding causes static electrical discharge (ESD), instantly frying expensive DX4 printheads and carriage driver boards.
4. Damper & Ink Line Management: Secure all 8 dual solvent dampers firmly into the integrated mounting brackets. Ensure ink lines have adequate slack to prevent pulling forces during full-width gantry travel.
Compatible Models & Systems
| Series / Lineup | Compatible Printer Models | Carriage Head Capacity |
|---|---|---|
| Mutoh Spitfire 100 Series | Spitfire 100 (SF-100) | 8 DX4 Solvent Printheads (MY-44743) |
| Mutoh Spitfire 90 Series | Spitfire 90 (SF-90) | 8 DX4 Solvent Printheads (MY-44743) |
| Mutoh Blizzard 90 Series | Blizzard 90 (BZ-90) | 8 DX4 Solvent Printheads (MS-Plus Inks) |
| Mutoh Rockhopper II Series (Reference) | Rockhopper II 50, 64, 87 | Incompatible: Standard Rockhopper uses 4-head carriage base |
| Mutoh ValueJet Series (Reference) | VJ-1604, VJ-1624, VJ-1638X | Incompatible: ValueJet platform uses DX5/DX7 carriage assemblies |
*Model Differentiation Note: Specifically engineered for Mutoh Spitfire 100, Spitfire 90, and Blizzard 90 grand-format solvent printers requiring the MY-80037 8-head carriage base. Confirm machine model and gantry configuration prior to ordering.
Terms, Warranty & Customer Protection
Condition: 100% Brand New, Genuine OEM Factory-Original Mutoh structural gantry replacement component in reinforced factory protective packaging.
Manufacturer Warranty: Covered under standard OEM parts limited warranty against material and manufacturing structural defects out-of-box prior to installation. No warranty applies if damage results from gantry crashes, impact strikes, improper linear rail torque, or static electrical discharge.
Return Policy: Precision grand-format structural mechanical component. Unopened, factory-sealed boxes are eligible for standard commercial return. Once unpacked, mounted to linear rails, or subjected to hardware installation, returns cannot be accepted due to precision machining datums and surface mounting marks.
MY-80037
376 Items
